The MEET-nConf 2023 Proceedings (ISSN: 2964-4615) is published by Department of Mechanical and Industrial Engineering, Faculty of Engineering, Gadjah Mada University, Yogyakarta, Indonesia.
MEET-nConf 2023 proceeding is published from 6th MECHANICAL ENGINEERING and EMERGING TECHNOLOGIES National Conference “Theme : Sustainable Manufacturing : Innovations, Challenges, and Solutions” has been done at September 12th, 2023. The MEET-nConf 2024 objectives are bringing together researchers, scientists, academics, students, policy makers, practitioners, private companies and professionals to exchange information and identify research needs in the areas of Mechanical and Industrial Engineering.
Redaksi
Jl. Grafika No.2 Yogyakarta 55281
Tel/Fax : (0274)521673
Email : meet-nconf.ft@ugm.ac.id
Vol 6 (2023) 6th Mechanical Engineering and Emerging Technologies National Conference 2023 in Conjuction with The PLN Indonesia Power Conference and The 4th Mechanical Engineering Joint Symposium (MEET-nConf 2023) Tema : Unleashing Synergies in Mechanical Engineering for a Vibrant, Sustainable and Net-Zero Emission Future Table of Contents  |
MATERIAL TEKNIK A PROPOSED FRAMEWORK OF MAINTENANCE APPROACH IN PETROLEUM INDUSTRIES Khusnun Widiyati dan Ahmad Isni Kurniawan (p.02) |
ENGINEERING SUSTAINABLE ENERGY SYSTEMS: EXPLORING NON-CARBON FUEL, CARBON OFFSET, AND FLEXIBLE POWER PLANT STRATEGIES FOR NET-ZERO EMISSIONS Firman Bagja Juangsa (p.03) |
MICROFLUIDIC DEVICES FABRICATION: ROLE OF MANUFACTURING ENGINEERING IN SUSTAINABILITY DEVELOPMENT GOALS (SDGS) Kushendarsyah Saptaji (p.04) |
ANALISIS TEGANGAN PADA TABUNG LPG KOMPOSIT MENGGUNAKAN FINITE ELEMENT ANALYSIS Danang S. W. Wardani, Gesang Nugroho, dan Muslim Mahardika (p.05-12) |
THE EFFECT OF MANJUNG POWER PLAN FLY ASH FILLER ON THE ALCL3-BASED SOLID POLYMER ELECTROLYTE (SPE) OF AN ALUMINUM ION BATTERY Sylvia Ayu Pradanawati, Muhammad Yuda Prakoso, Rashid Shamsuddin (p.13-17) |
TEKNOLOGI MANUFAKTUR Quality Inpection Pada Proses Produksi Press Part Dengan Imaging Machine Learning Wahyono Sapto Widodo dan Lydia A. (p.19) |
PENGEMBANGAN MICRO FRICTION STIR SPOT WELDING (MFSSW) DALAM PENYAMBUNGAN PELAT TIPIS ALUMINUM AA1100 Ario Sunar Baskoro, Pathya Rupajati, Mohammad Azwar Amat, dan Laksita Aji Safitri (p.20) |
HG2T METHOD (HELIUM GAS TRACER TEST) SOLUTION TO INCREASE CONDENSER VACUUM TIGHTNESS Hakim Satyadi, Herowiko Thama N, Fajri Eka M , dan Yohanes Kukuh M (p.21-26) |
ANALISA PENGARUH VARIASI ELEKTRODA TERHADAP SIFAT MEKANIS KEKUATAN UJI TARIK HASIL LAS BAJA ST 40 Lamidi dan Anis Siti Nurrohkayati (p.27-33)STUDI EKSPERIMENTAL MICRO PUNCHING SISTEM PNEUMATIK DAN ANALISIS CACAT PADA MATERIAL ALUMINIUM-ALLOY 1100 Sutomo Jati, Gesang Nugroho, Muslim Mahardika, Budi Arifvianto, Urip Agus Salim (p.34-41) |
MEKANIKA TERAPAN POWER FLOW ANALYSIS OF 5-BUS SYSTEM WIND FARM POWER ELECTRIC GRID USING GAUSS-SEIDEL ITERATIVE METHOD Muzakki Afandi dan Djati Wibowo (p.43-46) |
KONVERSI ENERGI BOILING HEAT TRANSFER FROM ENHANCED STRUCTURES: CHARACTERISTICS, THERMAL PERFORMACE, AND APPLICATIONS Indro Pranoto (p.48) |
ENERGY TRANSITION THROUGH DIVERSE TECHNOLOGIES: SELECTED RESEARCH OF SMR NUCLEAR POWER PLANT, MODERNIZING VINTAGE HYDRO TURBINE, RENEWABLE COFIRING, OCEAN ENERGY AND BATTERY STORAGE Sugeng Triyono (p.49) |
ANALISIS KOMPARASI PERPINDAHAN PANAS UNTUK MATERIAL CARBON STEEL DAN STAINLESS STEEL 304 PADA ALAT PENUKAR KALOR Irwan Suriaman, Yadi Heryadi, dan TB. U. Adi Subekhi (p.50-53) |
THERMAL EFFECT ON THE STEAM TURBINE COOLING PROCESS AFTER SHUTDOWN USING PARALLEL CONVECTION IN SALAK GEOTHERMAL POWER PLANT Redho Nur Ridho, I Made Chikas Rendra Taka, dan Yunus Afandi (p.54-59) |
FUEL GAS HEATER (FGH) FOR ENERGY EFFICIENCY ENHANCEMENT OF GRATI BLOCK 3 COMBINED CYCLE POWER PLANT (CCPP) Didik Purwanto, Muhammad Hafizh Ridho, dan Hilmy Hanifudin (p.60-63) |
STUDI EKSPERIMENTAL KOEFISIEN PERPINDAHAN KALOR DENGAN VARIASI FINS GAP PADA SQUARE PIN FINS DENGAN FLUIDA UDARA Mercurio Daffa Aditya, Indro Pranoto, dan Ferdinand Maycello (p.64-68) |
HEALTH INDEX MONITORING USING MACHINE LEARNING WITH THE K-NEAREST NEIGHBORS METHOD TO IMPROVE OPTIMALISATION OPERASION OF DESALINATION PLAN Agus Budiman dan Alief Rakhman Mukhtar (p.69-73) |
UTILIZATION OF PALM SHELL WASTE TO HAVE GREEN ELECTRICITY AT PLTU BERAU OMU Dadang Hidayat dan Irwan Firmanto Nainggolan (p.74-76) |
PENGARUH KARAKTERISTIK FENOMENA PENDIDIHAN PADA UJI POOL BOILING UNTUK BERBAGAI SUDUT ORIENTASI Bimarendra Nurcahya Perbawa dan Indro Pranoto (p.77-82) |
DEVELOPMENT OF IMMERSION COOLING-BASED COOLING SYSTEM EXPERIMENT FACILITY FOR 18650 LITHIUM-ION BATTERIES IN ELECTRIC VEHICLES Alfiqri Aldy Dewanto, Rusdi Febriyanto, Indro Pranoto, Hifni Mukhtar Ariyadi, dan Khasani (p.83-88) |
BOOST INDONESIA’S ENERGY SECTOR POST-PANDEMIC TOWARDS NET ZERO AMBITION Tri Setia Wibowo (p.89-95) |
INVESTIGATION ON EMISSION CHARACTERISTICS OF A BIOGAS FUELLED ELECTRIC GENERATOR I Gede Artha Negara, I Made Anom Adiaksa, I Wayan Marlon Managi, I Wayan Suma Wibawa, dan Made Ardikosa Satrya Wibawa (p.96-99) |
Scientific Committee
Budi Hartono (Universitas Gadjah Mada)
Adhika Widyaparaga (Universitas Gadjah Mada)
Tarwaji (PT. PLN Indonesia Power)
Sugeng Triyono (PT. PLN Indonesia Power)
Toto Wardoyo (PT. PLN Indonesia Power)
Ario Sunar Baskoro (Universitas Indonesia)
Firman Bagja Juangsa (Institut Teknologi Bandung)
Khusnun Widiyati (Universitas Pertamina)
Kushendarsyah Saptaji (Sampoerna University)
Wahyono Sapto Widodo (President University)
Ketua Editor
Burhan Febrinawarta (Universitas Gadjah Mada)
Anggota Editor
Budi Arifvianto (Universitas Gadjah Mada)
Ardi Wiranata (Universitas Gadjah Mada)
Reviewers
Eko Pujiyulianto (Institut Teknologi Sumatera)
Agung Purniawan (Institut Teknologi Sepuluh Nopember)
Djati Wibowo Djamari (Sampoerna University)
Teguh Dwi Widodo (Universitas Brawijaya)
Yazdi Ibrahim Jeni (Institut Teknologi Bandung)
Sugeng Triyono (PT. PLN Indonesia Power)
Toto Wardoyo (PT. PLN Indonesia Power)
Indro Pranoto (Universitas Gadjah Mada)
Muslim Mahardika (Universitas Gadjah Mada)
Urip Agus Salim (Universitas Gadjah Mada)
Priyo Tri Iswanto (Universitas Gadjah Mada)
Akmal Irfan Majid (Universitas Gadjah Mada)
Robertus Dhimas Dhewangga Putra (Universitas Gadjah Mada)
Hifni Mukhtar Ariyadi (Universitas Gadjah Mada)
Indraswari Kusumaningtyas (Universitas Gadjah Mada)
Muhammad Akhsin Muflikhun (Universitas Gadjah Mada)
Fauzun (Universitas Gadjah Mada)
Rachmat A. Sriwijaya (Universitas Gadjah Mada)
Jayan Sentanuhady (Universitas Gadjah Mada)
Khasani (Universitas Gadjah Mada)
Joko Waluyo (Universitas Gadjah Mada)
Syahirul Alim Ritonga (Universitas Gadjah Mada)
Layout Editor
Muhammad Ikhlas
Wahyu Hayatullah
Widia Kartika
Penerbit
Departemen Teknik Mesin dan Industri, Fakultas Teknik Universitas Gadjah Mada
Penanggung Jawab
Ketua Departemen Teknik Mesin dan Industri UGM
Prof. Ir. Budi Hartono, S.T., M.Pm.,Ph.D., IPM., ASEAN Eng.
Panitia
Steering Committee:
Ardi Wiranata, S.T.,M.Eng., Ph.D.
Dr. Ir. Budi Arifvianto, S.T., M. Biotech.
Ir. Indro Pranoto,S.T., M.Eng., Ph.D.,IPM., ASEAN Eng.
Ir. Muslim Mahardika, S.T., M.Eng, Ph.D, IPM., ASEAN Eng.
Toto Wardoyo S.T., M.T. (Manager Generation and Project Technology Development)
Koordinator MEET : Burhan Febrinawarta, S.T., M.T.
Panitia Mahasiswa
Muhammad Ikhlas, S.T.
Wahyu Erlangga, S.Pd.
Peter Prayogo Pangestu, S.T.
Risda Azizah Hasna, S.T.
Dede Satria Maulana, S.T.
Syafria Wildan Hadi S.T
Muhammad Arif Saputro S.T.
Jones Parmahan Siagian, S.T.
Wahyu Hayatullah, S.T.
Intan Regina Elysabeth S.T.
Yulius Tomy Wijaya, S.T.
Widia Kartika,S.T.
Ahmad Murtadlo Zaka, S.Pd.
Riko Aulia ranchman, S.T.
Ikhsanul Fikri Fakhrurrozi, S.T
Widyastutifajri Nuha, S.T.
Sitti Patimah Wati, S.Si
Rafid Zulfiadib, S.T.
Muhammad Ibnu Rashyid, S.Tr.T.
Fajar Fitriani, S.T.
